Reference for page : ADSL
Summary
This page contains all parameters needed to configure the ADSL WAN of the router.
Advanced
Parameters reference
Parameter : "Enable ADSL"
Definition
Id | p_wan_adsl_enable |
Type | Boolean |
Label | Enable ADSL |
Default value | Not available |
Parameter : "Modulation"
Definition
Id | p_wan_adsl_modulation |
Type | Choice |
Label | Modulation |
Possible values |
option_adsl_auto |
Multimode |
option_adsl_t1413 |
ANSI T1.413 |
option_adsl_gdmt |
G.DMT (ITU G992.1) |
option_adsl_glite |
G.Lite (ITU G992.2) |
option_adsl_adsl2 |
ADSL2 (G.992.3) |
option_adsl_adsl2plus |
ADSL2+ (G.992.5) |
|
Default value | Not available |
Description
When "Multimode" is choosen, the modem will adapt his modulation to the Internet provider.
Otherwise, ask your provider which modulation has to be used.
Parameter : "Enable annex L (Re-ADSL)"
Definition
Id | p_wan_adsl_annex_l |
Type | Boolean |
Label | Enable annex L (Re-ADSL) |
Default value | Not available |
Parameter : "Enable annex M (Double upstream rate)"
Definition
Id | p_wan_adsl_annex_m |
Type | Boolean |
Label | Enable annex M (Double upstream rate) |
Default value | Not available |
Parameter : "ATM VPI"
Definition
Id | p_wan_adsl_atm_vpi |
Type | Number |
Label | ATM VPI |
Minimum | 0 |
Maximum | 4095 |
Step | 1 |
Default value | Not available |
Description
Virtual Path Identifier
Parameter : "ATM VCI"
Definition
Id | p_wan_adsl_atm_vci |
Type | Number |
Label | ATM VCI |
Minimum | 0 |
Maximum | 65535 |
Step | 1 |
Default value | Not available |
Description
Virtual Channel Identifier
Parameter : "Multiplexing"
Definition
Id | p_wan_adsl_atm_mux |
Type | Choice |
Label | Multiplexing |
Possible values |
option_adsl_atm_vc |
VC |
option_adsl_atm_llc |
LLC |
|
Default value | Not available |
Parameter : "Encapsulation"
Definition
Id | p_wan_adsl_atm_encaps |
Type | Choice |
Label | Encapsulation |
Possible values |
option_adsl_encaps_pppoe |
PPPoE : PPP over Ethernet, RFC 2684 Bridged |
option_adsl_encaps_pppoa |
PPPoA : PPP over ATM |
option_adsl_encaps_eoa |
EoA : Ethernet over ATM, RFC 2684 Bridged |
option_adsl_encaps_ipoa |
IPoA : IP over ATM, RFC2684 Routed |
|
Default value | Not available |
Parameter : "ADSL WAN priority"
Definition
Id | p_wan_adsl_ip_priority |
Type | Choice |
Label | ADSL WAN priority |
Possible values |
option_low |
Low |
option_normal |
Normal |
option_mean |
Medium |
option_high |
High |
|
Default value | Not available |
Description
Enter the ADSL WAN interface priority. This option allow to prioritize a WAN compared to another.
1 is the highest priority and 100 the lowest.
This option is usefull to configure the WAN link backup system.
Parameter : "PPP Login"
Definition
Id | p_wan_adsl_ppp_login |
Type | text |
Label | PPP Login |
Default value | Not available |
Description
Login for the Internet provider connection.
Parameter : "PPP password"
Definition
Id | p_wan_adsl_ppp_passwd |
Type | password |
Label | PPP password |
Default value | Not available |
Description
Password for the internet provider connection.
Parameter : "PPPoE service name"
Definition
Id | p_wan_adsl_ppp_service |
Type | text |
Label | PPPoE service name |
Default value | Not available |
Parameter : "Obtain an IP address automatically"
Definition
Id | p_wan_adsl_ip_dhcp |
Type | Boolean |
Label | Obtain an IP address automatically |
Default value | Not available |
Description
Select that option if the provider is supposed to assign an IP address to the router each time it connects to the Internet.
Parameter : "IP address"
Definition
Id | p_wan_adsl_ip_addr |
Type | IP address |
Label | IP address |
Default value | Not available |
Parameter : "Remote IP address"
Definition
Id | p_wan_adsl_ip_peer |
Type | IP address |
Label | Remote IP address |
Default value | Not available |
Parameter : "Netmask"
Definition
Id | p_wan_adsl_ip_mask |
Type | IP subnet mask |
Label | Netmask |
Default value | Not available |
Description
Enter the WAN netmask.
Parameter : "Gateway"
Definition
Id | p_wan_adsl_ip_gateway |
Type | IP address |
Label | Gateway |
Default value | Not available |
Description
Enter the default gateway IP address.
Parameter : "Obtain DNS servers addresses automatically"
Definition
Id | p_wan_adsl_ip_autodns |
Type | Boolean |
Label | Obtain DNS servers addresses automatically |
Default value | Not available |
Description
Check this box DNS server addresses are automatically given by the Internet provider.
Parameter : "Primary DNS server"
Definition
Id | p_wan_adsl_ip_dns1 |
Type | IP address |
Label | Primary DNS server |
Default value | Not available |
Description
This parameter defines the IP adress of the primary DNS server (first to be required).
Parameter : "Secondary DNS server"
Definition
Id | p_wan_adsl_ip_dns2 |
Type | IP address |
Label | Secondary DNS server |
Default value | Not available |
Description
This parameter defines the IP adress of the secondary DNS server (second to be required).
Parameter : "Enable address translation (NAT)"
Definition
Id | p_wan_adsl_ip_nat |
Type | Boolean |
Label | Enable address translation (NAT) |
Default value | Not available |
Description
Check this box if the router should replace source address of IP packets comming from LAN with his own WAN IP address.
Parameter : "Enable proxy ARP"
Definition
Id | p_wan_adsl_ip_proxyarp |
Type | Boolean |
Label | Enable proxy ARP |
Default value | Not available |
Description
If that checkbox is selected, the router will answer to an ARP request:
- If it comes from a device connected to the LAN interface
- And if it concerns a device belonging to the IP network connected the WAN interface.