ETIC Administration

FTP Server

A FTP server can be enabled on the device.

Enable the FTP server

FTP server username

FTP server password

Password strength

FTP server security

FTP transmits the password in cleartext over the network. Anyone listening will see it and can use it to access your server. It is therefore recommended to use TLS to encrypt your FTP sessions. The WinSCP client can be used to establish secured FTP connections. To enable the FTP server on the WAN interface, you have to enable TLS.

Enable TLS

Enable on WAN interface

FTP Client

The device can put files on an FTP server every day.

Enable the FTP client

Enable the FTP over TLS (FTPS)

Trusted certificates

FTP server CA certificate

Data transfer mode to the FTP server

FTP server IP address or hostname

FTP server username

FTP server password

Directory to write to on the FTP server (Required for push mode)

Period to push files

push data every n hours

(1 to 24, step 1)

Push data every n minutes

(1 to 60, step 1)

Period of synchronization

Synchronize data every n hours

(1 to 23, step 1)

Synchronize data every n minutes

(1 to 60, step 1)

Hour of the day when to sync with the FTP server

(0 to 23, step 1)

compress data

Synchronize now

Push now

E-mail log sending

The device can send variables log files by e-mail every day.

Enable

Address

Hour of the day when to send e-mail

(0 to 23, step 1)

Send now

> Home > Datalogger > Setup > CSV logs sharing

FTP Server

FTP server security

FTP Client

E-mail log sending