Reference for page : ADSL
Summary
This page contains all parameters needed to configure the ADSL WAN of the router.
Advanced
Parameters reference
Parameter : "Enable ADSL"
Definition
| Id | p_wan_adsl_enable |
| Type | Boolean |
| Label | Enable ADSL |
| Default value | Not available |
Parameter : "Modulation"
Definition
| Id | p_wan_adsl_modulation |
| Type | Choice |
| Label | Modulation |
| Possible values |
| option_adsl_auto |
Multimode |
| option_adsl_t1413 |
ANSI T1.413 |
| option_adsl_gdmt |
G.DMT (ITU G992.1) |
| option_adsl_glite |
G.Lite (ITU G992.2) |
| option_adsl_adsl2 |
ADSL2 (G.992.3) |
| option_adsl_adsl2plus |
ADSL2+ (G.992.5) |
|
| Default value | Not available |
Description
When "Multimode" is choosen, the modem will adapt his modulation to the Internet provider.
Otherwise, ask your provider which modulation has to be used.
Parameter : "Enable annex L (Re-ADSL)"
Definition
| Id | p_wan_adsl_annex_l |
| Type | Boolean |
| Label | Enable annex L (Re-ADSL) |
| Default value | Not available |
Parameter : "Enable annex M (Double upstream rate)"
Definition
| Id | p_wan_adsl_annex_m |
| Type | Boolean |
| Label | Enable annex M (Double upstream rate) |
| Default value | Not available |
Parameter : "ATM VPI"
Definition
| Id | p_wan_adsl_atm_vpi |
| Type | Number |
| Label | ATM VPI |
| Minimum | 0 |
| Maximum | 4095 |
| Step | 1 |
| Default value | Not available |
Description
Virtual Path Identifier
Parameter : "ATM VCI"
Definition
| Id | p_wan_adsl_atm_vci |
| Type | Number |
| Label | ATM VCI |
| Minimum | 0 |
| Maximum | 65535 |
| Step | 1 |
| Default value | Not available |
Description
Virtual Channel Identifier
Parameter : "Multiplexing"
Definition
| Id | p_wan_adsl_atm_mux |
| Type | Choice |
| Label | Multiplexing |
| Possible values |
| option_adsl_atm_vc |
VC |
| option_adsl_atm_llc |
LLC |
|
| Default value | Not available |
Parameter : "Encapsulation"
Definition
| Id | p_wan_adsl_atm_encaps |
| Type | Choice |
| Label | Encapsulation |
| Possible values |
| option_adsl_encaps_pppoe |
PPPoE : PPP over Ethernet, RFC 2684 Bridged |
| option_adsl_encaps_pppoa |
PPPoA : PPP over ATM |
| option_adsl_encaps_eoa |
EoA : Ethernet over ATM, RFC 2684 Bridged |
| option_adsl_encaps_ipoa |
IPoA : IP over ATM, RFC2684 Routed |
|
| Default value | Not available |
Parameter : "ADSL WAN priority"
Definition
| Id | p_wan_adsl_ip_priority |
| Type | Choice |
| Label | ADSL WAN priority |
| Possible values |
| option_low |
Low |
| option_normal |
Normal |
| option_mean |
Medium |
| option_high |
High |
|
| Default value | Not available |
Description
Enter the ADSL WAN interface priority. This option allow to prioritize a WAN compared to another.
1 is the highest priority and 100 the lowest.
This option is usefull to configure the WAN link backup system.
Parameter : "PPP Login"
Definition
| Id | p_wan_adsl_ppp_login |
| Type | text |
| Label | PPP Login |
| Default value | Not available |
Description
Login for the Internet provider connection.
Parameter : "PPP password"
Definition
| Id | p_wan_adsl_ppp_passwd |
| Type | password |
| Label | PPP password |
| Default value | Not available |
Description
Password for the internet provider connection.
Parameter : "PPPoE service name"
Definition
| Id | p_wan_adsl_ppp_service |
| Type | text |
| Label | PPPoE service name |
| Default value | Not available |
Parameter : "Obtain an IP address automatically"
Definition
| Id | p_wan_adsl_ip_dhcp |
| Type | Boolean |
| Label | Obtain an IP address automatically |
| Default value | Not available |
Description
Select that option if the provider is supposed to assign an IP address to the router each time it connects to the Internet.
Parameter : "IP address"
Definition
| Id | p_wan_adsl_ip_addr |
| Type | IP address |
| Label | IP address |
| Default value | Not available |
Parameter : "Remote IP address"
Definition
| Id | p_wan_adsl_ip_peer |
| Type | IP address |
| Label | Remote IP address |
| Default value | Not available |
Parameter : "Netmask"
Definition
| Id | p_wan_adsl_ip_mask |
| Type | IP subnet mask |
| Label | Netmask |
| Default value | Not available |
Description
Enter the WAN netmask.
Parameter : "Gateway"
Definition
| Id | p_wan_adsl_ip_gateway |
| Type | IP address |
| Label | Gateway |
| Default value | Not available |
Description
Enter the default gateway IP address.
Parameter : "Obtain DNS servers addresses automatically"
Definition
| Id | p_wan_adsl_ip_autodns |
| Type | Boolean |
| Label | Obtain DNS servers addresses automatically |
| Default value | Not available |
Description
Check this box DNS server addresses are automatically given by the Internet provider.
Parameter : "Primary DNS server"
Definition
| Id | p_wan_adsl_ip_dns1 |
| Type | IP address |
| Label | Primary DNS server |
| Default value | Not available |
Description
This parameter defines the IP adress of the primary DNS server (first to be required).
Parameter : "Secondary DNS server"
Definition
| Id | p_wan_adsl_ip_dns2 |
| Type | IP address |
| Label | Secondary DNS server |
| Default value | Not available |
Description
This parameter defines the IP adress of the secondary DNS server (second to be required).
Parameter : "Enable address translation (NAT)"
Definition
| Id | p_wan_adsl_ip_nat |
| Type | Boolean |
| Label | Enable address translation (NAT) |
| Default value | Not available |
Description
Check this box if the router should replace source address of IP packets comming from LAN with his own WAN IP address.
Parameter : "Enable proxy ARP"
Definition
| Id | p_wan_adsl_ip_proxyarp |
| Type | Boolean |
| Label | Enable proxy ARP |
| Default value | Not available |
Description
If that checkbox is selected, the router will answer to an ARP request:
- If it comes from a device connected to the LAN interface
- And if it concerns a device belonging to the IP network connected the WAN interface.
Parameter : "Enable ping control"
Definition
| Id | p_wan_adsl_ctrl_enable |
| Type | Boolean |
| Label | Enable ping control |
| Default value | Not available |
Description
Check this box to enable the connection control on the related WAN
Parameter : "IP address to ping"
Definition
| Id | p_wan_adsl_ctrl_ip_ping |
| Type | IP address |
| Label | IP address to ping |
| Default value | Not available |
Description
Enter the IP address of the remote equipment the application should ping.
The remote equipment should be permanently reachable: if the remote equipment does not respond after a while, the WAN is disabled.
Parameter : "Ping interval"
Definition
| Id | p_wan_adsl_ctrl_ip_ping_interval |
| Type | Choice |
| Label | Ping interval |
| Possible values |
| option_10s |
10 s |
| option_20s |
20 s |
| option_30s |
30 s |
| option_1m |
1 minute |
| option_2m |
2 minutes |
| option_5m |
5 minutes |
|
| Default value | Not available |
Description
Enter ping transmission period.
Parameter : "Ping retries"
Definition
| Id | p_wan_adsl_ctrl_ip_ping_retries |
| Type | Choice |
| Label | Ping retries |
| Possible values |
| option_2 |
2 |
| option_4 |
4 |
| option_8 |
8 |
|
| Default value | Not available |
Description
If the remote equipment does not respond, pings are repeated to confirm the link is broken.
Enter there the amount of times the ping sequence is repeated before declaring the link broken.